How to Use and Set Up OpenClaw: From Installation to Checking the Gateway

OpenClaw is an AI agent that connects AI models with chat through a Gateway you host yourself. First, set up Node.js and access to a model, run the official startup command, and send a single message from the browser interface. You can add messaging app integrations once the first chat is working. The steps below follow the official Getting Started guide.

official Getting Started guidehttps://docs.openclaw.ai/start/getting-started

To use OpenClaw, start it, authenticate with a model, chat in the Control UI, and check the results, in that order. You do not need to run the Gateway continuously from the outset. You can begin by running it in a terminal and stopping it when you finish.

If you plan to set up a Gateway and connect models or external services, you can review the available assistance through our AI agent setup support, including OpenClaw.

AI agent setup support, including OpenClawhttps://zettai-ai-agent-site-render.onrender.com/

How to Use OpenClaw: The Quickest Way to Try Your First Request

According to the official Getting Started guide, checked on October 28, 2026, you can get started with the following commands once you have a supported version of Node.js and access to a model.

official Getting Started guidehttps://docs.openclaw.ai/start/getting-started

node --version
npx openclaw@latest

In a new environment, follow the instructions and select Quick start. If existing authentication for an available model is found, the web-based Control UI opens after confirmation, and you can send your first message. If none is found, manual provider setup begins. Start with one request whose results are easy to verify, such as: “Summarize the key points of this public page in three points and provide the source URL. Do not publish posts or modify files.”

With this method, the Gateway is running in your terminal. Pressing Ctrl+C stops it, and your settings are saved. Once you have confirmed that chat works, proceed to continuous operation if needed. If the installation method or interface differs from the official screens, check the latest installation instructions.

latest installation instructionshttps://docs.openclaw.ai/install

What Can You Do with OpenClaw?

You can use chat to bring together requests for recurring tasks, such as “Check these specific public sources every morning and send me the key points” or “Categorize the specified inquiries.” The actions it can actually perform depend on the connected model, skills, channels, and permissions you grant. Tasks such as posting to external services or modifying internal company files require a separate plan for authentication and approvals.

OpenClaw is not a standalone chat app. You need someone responsible for operating the Gateway and managing its connections and execution permissions.

What You Need Before Getting Started with OpenClaw

ItemWhat to check
Runtime environmentThe official English-language guide, checked on October 28, 2026, specifies Node.js 24.16.0 or later in the 24.x series, or 26.1.0 or later. Node.js 26 is recommended.
AI modelAn existing Claude Code or Codex CLI login, or an API key for a supported provider
PermissionsBegin in a test environment using only public information.

You can check your Node.js version with node --version. On Windows, the Windows Hub app described in the official Windows guide is another option. Check the official instructions for your operating system and chosen setup method.

official Windows guidehttps://docs.openclaw.ai/platforms/windows

Setting Up OpenClaw: Getting the Gateway Running

The official installation documentation lists Windows Hub as the installation path for Windows and the official installer for macOS and Linux. The setup below is for one person to try OpenClaw locally before moving to continuous operation. If you plan to run it on a VPS or in Docker, also review the official hosting documentation and security documentation.

official installation documentationhttps://docs.openclaw.ai/install

official hosting documentationhttps://docs.openclaw.ai/install

security documentationhttps://docs.openclaw.ai/gateway/security

  1. Choose an installation method: On Windows, you can use Windows Hub. On macOS, Linux, or WSL2, check the distribution source and instructions on the official installation page before installing. If you manage Node.js yourself, check the required version first as well.
  2. Connect a model: Follow the installer instructions to select Quick start or Custom setup, then configure the model provider and authentication method. Do not paste credentials into the article's example prompts or onto shared screens.
  3. Run the Gateway continuously if needed: After your first terminal-based chat succeeds, follow the official guide to run openclaw gateway install. Then check that it is running with openclaw gateway status and open the Control UI with openclaw dashboard.
  4. Try a small real-world task: Specify one public page and ask: “Summarize the key points in three points and provide the source URL. Do not post to external services or modify files.” Have a person check the sources, response, and execution history.
CheckWhat completion looks likeIf it does not work
Installationopenclaw --version displays the version.Check the supported Node.js version and the command's PATH.
GatewayIf you have configured continuous operation, openclaw gateway status confirms that it is running.See openclaw triage in the official troubleshooting steps
https://docs.openclaw.ai/start/getting-started
.
ModelA response arrives in the Control UI chat.Recheck the model selection and authentication.
Safe first requestYou can verify the sources and results, and no external changes have been made.Review the request and logs before expanding permissions.

This table provides checks based on official commands; it does not report hands-on test results for a specific operating system or subscription. For continuous operation, consider setup complete only after deciding on operating system service settings, updates, backups, and who is responsible for stopping the service. Add messaging app integrations after local chat is working properly.

When OpenClaw Does Not Work

First, check your Node.js version, model authentication, and whether the Gateway is running. The official getting-started guide recommends openclaw triage to diagnose setup problems. If you started it in a terminal, check the errors shown there. If you configured continuous operation, also check openclaw gateway status. Read the official security guide before exposing the Gateway's endpoint or ports publicly.

official security guidehttps://docs.openclaw.ai/gateway/security

Include Costs Beyond the Software Itself

When comparing costs, estimate hosting, AI model usage fees, connected services, maintenance and monitoring, and operators' time separately. Assuming you can run it for free based solely on the cost of obtaining the software can cause you to overlook ongoing expenses. Costs also vary with the frequency of scheduled runs and how you store long conversations.

Initial Security Checks

The official security guide covers settings such as Gateway exposure, pairing, allowlists, and auditing. For internal company use, check the following first.

official security guidehttps://docs.openclaw.ai/gateway/security

RiskSettings to check
Anyone can submit requestsAllowed connection sources and user authentication
Excessive permissionsSeparate permissions for files, commands, and external services.
Leaks of confidential informationCredential storage locations, logs, and the data users are allowed to enter
Unintended automatic executionApprovals, execution history, and shutdown procedures

Especially when exposing the Gateway to the internet, have someone who understands what the settings mean review the configuration.

Frequently Asked Questions

Does using OpenClaw mean I do not need an AI model subscription? You still need a way to access a model. The API or local model setup you need depends on your configuration.

Can non-engineers operate it on their own? Day-to-day use can center on chat, but it is safer to assign someone responsible for initial setup, authentication, updates, and troubleshooting.

Do I have to configure a messaging app to use OpenClaw? You can perform the initial functionality check in the web dashboard. Channel integrations can be added afterward.

How do I stop OpenClaw? You can stop the initial Gateway running in your terminal through npx openclaw@latest by pressing Ctrl+C. After switching to continuous operation, consult the official Gateway management instructions to check the service status and how to stop it.

Related Articles

If you would like to design an execution environment and permissions tailored to your company's work, please contact us.

If it is difficult to set up the operating environment and permissions entirely within your company, see ZETTAi's AI agent setup and operation support.

ZETTAi's AI agent setup and operation supporthttps://zettai-ai-agent-site-render.onrender.com/